"2001"

Request for a commercial contact:

I'm interested in:"2001"

* Required Fields
Close
Send Request

Area download

Close

"2001"

Solid – Self-Ventilated Wall and Roof– Stackable up to 4-Storey

The shelter series “2001” was the very first to roll off the EDILSIDER manufacturing line and it is the result of more than 50 years of experience. With over 15000 manufactured units, this shelter is marketed to accommodate an extremely broad range of requirements over the world, from the hot desert of Algeria, to the humid forests of Nigeria and the cold climate of Siberia, Iceland and North Kazakhstan. The shelter series “2001” is exceptionally comfortable, easy to move and handle, able to maintain adequate performance in time and requiring low maintenance. The main highlight of the shelters series “2001” is the self-ventilation system devised for the walls and the roof. The shelter is naturally cooled during the hot season and moisture condensing is prevented during the cold season.

Dimensions

Lenght:  2,99 – 6,05 – 9,15 – 12,19 m
Width: 2,43 - 2,9 m
Outside Height: 2,59 – 2,89 – 3,09  m
Inside Height:  2,19 – 2,5 – 2,7 m

Other dimensions can be arranged to meet specific requirements expressed by the Customer.

Basement

The basement is self-supporting and consists of an edge frame made cold-drawn, galvanised steel C-channels, welded to the four corner blocks.
Fork pockets may be provided upon request .

Floor

Step floor is made in recycled plastic panels, fixed to the sub-structure by drywall nails and covered by wall to wall.
Floor live load: 200 Kg/m2 uniformly distributed.

External Walls

Cladding consists of 8/10 mm thick hot galvanised ribbed steel panels. Insulation is achieved by mineral wool mattresses wrapped in polyethylene bags.
The inside panelling of living shelters is constructed chipboard panels with the inner face finished with a white PVC sheet .
In shelters used as toilet facilities, laundry room, food preparation, washing room, kitchen, as well as in technical modules, the inside panelling consists of self-supporting "sandwich" type panels.
The roof and the basement are connected by means of 4 corner posts, made up galvanised rolled steel sections.
Finishing between walls and floor is achieved by PVC skirting fitted into the guide of wall panels.

Roof

The roof is made in cold rolled hot dip galvanised steel profiles.
Shelters can be lifted and moved by the corner blocks on the roof or by the crane lift bracket eyelets in central position.
External covering consists of corrugated galvanised steel sheets.
The suspended ceiling of living shelters is made chipboard panels with the inner face finished with a white PVC sheet.
Standard roof live load: 150 Kg/m2 uniformly distributed.

Internal Partition Walls

Internal partition walls of living shelters are composed of two panels of chipboard one-side finished with white PVC sheet; gap for the soundproofing is provided.
Upon request, a mineral wool mattress can be inserted between the two chipboard panels to improve insulation properties.

Doors and Windows

The basement is self-supporting and consists of an edge frame made cold-drawn, galvanised steel C-channels, welded to the four corner blocks.
Fork pockets may be provided upon request .

Electrical Installation

In accordance with currently enforceable IEC regulations.

A waterproof junction box is mounted on the outside of the shelter, while the inside houses a self-extinguishing PVC electric panel which accommodates differential switches and thermal magnetic circuit breakers.
10A/16A shuttered socket outlets, widely used in Italy, are positioned in a manner such as to match the various installed appliances.
According to its intended use, indoor lighting inside each building can be achieved either by means of glass fibre reinforced polyester ceiling fixtures and a methacrylate diffusing screen.


Sanitary Installation

The supply ducts are of butylenes complete with fittings and fixtures for hot and cold water.
External connection to the mains is provided by one threaded connection of appropriate diameter.
Sewage pipes are of heavy PVC, securely fixed to modules and led to the designed exit point for connection to the external sewerage mains.

Heating and Air Conditioning Systems

As to possible air conditioning, window type air conditioners or split air conditioners, coming in cool-only versions or reversible heat pump configurations, are available.

Painting

The outside finish is applied once the prefabricated building is fully assembled, according to the following cycle :
 
-Washing of steel sheets with an appropriate deterging solution to remove zinc salts from the surface.
-Applying a coat of white epoxy paint (RAL 9010) devised for galvanised steel sheets.
 
The above protective cycle can be modified to meet specific requirements expressed by the customer and the environment in which the prefabricated building will be erected. 


Top