"1001"

Request for a commercial contact:

I'm interested in:"1001"

* Required Fields
Close
Send Request

Area download

Close

"1001"

Stability and Rigidity – Stackable up to 3-Storey – Compactibility

The shelters series “1001” have been designed to take as little space as possible during shipping: as a matter of fact, they can be flat-packed into 650 mm high modules (maximum) so that four units can fit into the space usually needed for a single shelter. Each block housing the above modules is rigid and stable enough to be handled and lifted through a crane anchored to the corner blocks that are laid on both the roof and the basement. The assembly of the shelters series 1001 requires no skilled labour: interchangeable cladding panels are tied together by male–female connections, the basement and the roof are entirely pre-assembled, the electrical equipment is factory pre-wired and tested. Another key feature of the shelters series “1001” is the roof self ventilation system: the air space between the suspended ceiling and the external sheet protects the building from intense heat during hot season and prevents moisture from condensing during the cold season. All metal sections used in the structure are subjected to a hot galvanising process. Units can be stacked to form a 3-storey building. Furthermore, they can be linked on all four sides.

Dimensions

Length:  2,99 – 6,05 – 9,12 – 12,19 m
Width: 2,43 – 2,90 m
Outside height: 2,59 – 2,85 – 3,05 m
Inside height:  2,24 – 2,5 – 2,7 m

Other dimensions can be arranged to meet specific requirements expressed by the Customer.

Basement

The basement is self-supporting and consists of an edge frame made of 150 mm high 2,5 mm thick cold-drawn, galvanised steel C-channels, welded to the four ISO TL 104-compliant corner blocks. Fork pockets may be provided upon request.

Floor

Step floor is made in recycled plastic extruded panels.The Panels are waterproof, anti-bacterial, anti-mushrooms and anti-insects, fixed to the sub-structure by drywall nails and covered by wall to wall.
Floor live load: 250 Kg/m2 uniformly distributed.

External Walls

External walls consist of self-supporting sandwich type panels.
The insulation is ensured either by a core of self-extinguishing polyurethane resins, or by strips of mineral wool. In this case, upon request, the panels can be supplied with REI certification according to UNI EN 13501. Panels have waterproof and dustproof tongue-and-groove vertical joints and are fully interchangeable. Finishing between walls and floor is achieved by PVC baseboard fitted into the guide of wall panels. Finishing between wall panels at corners is realized with flashings in pre-coated steel sheet fixed by screws or rivets.

Roof

The roof is made in cold rolled hot dip galvanised steel profiles, forming the edge frame, welded to the four corner support blocks.
External covering consists of corrugated galvanised steel sheets.
The ceiling is made of sandwich type panels.
A mattress of glass wool is laid upon the suspended ceiling to improve the thermo-acoustical insulation.
A key feature of the roof is its self ventilation system: the air space between the suspended ceiling and the external sheet protects the building from intense heat dur-ing hot season and prevents moisture from condensing during the cold season.
Standard roof live load: 150 Kg/m2 uniformly distributed.
 

Internal Partition Walls

Internal partition walls consist of self-supporting sandwich type panels.
The insulation is ensured either by a core of self-extinguishing polyurethane resins, or by strips of mineral wool. In this case, upon request, the panels can be supplied with REI certification according to UNI EN 13501.
Panels have waterproof and dustproof tongue-and-groove vertical joints and are fully interchangeable.

Doors and Windows

Doors and window frames, made from silver anodised aluminium-based alloy profiles, assembled  on a galvanized steel frame prepainted. Standard windows are of the outward protruding type; they are supplied with "Termopan" 4/10/4 glass, inner handles and extendable/retractable arms that lock the sash once open.
The number of windows and their dimensions are such as to ensure a 1/8 ventilation/lighting ratio. Fittings available upon request .
External solid doors made from a polystyrene insulation board.
Fittings available upon request include: anti-panic bars, upper/lower safety glass, door closers.
Internal doors are formed by the doors are made in white insulated aluminum panel.
Other doors and windows types can be supplied on specific requirements expressed by the Customer.

Electrical Installation

In accordance with currently enforceable European regulations.

A waterproof junction box is mounted on the outside of the shelter, while the inside houses a self-extinguishing PVC electric panel which accommodates differential switches and thermal magnetic circuit breakers.
10A/16A shuttered socket outlets, widely used in the country of application, are positioned in a manner such as to match the various installed appliances.
According to its intended use, indoor lighting inside each building can be achieved either by means of glass fibre reinforced polyester ceiling fixtures and a methacrylate diffusing screen.

Sanitary Installation

Plumbing fixtures are engineered for time effectiveness and easy maintenance.
The supply ducts are of butylenes complete with fittings and fixtures for hot and cold water.
Sewage pipes are in polyethylene, securely fixed to modules and led to the designed exit point for connection to the external sewerage mains.

Heating and Air Conditioning Systems

The heating system, if any, consists of wall mount, electric convector heaters with temperature controller.  As to possible air conditioning, window type air conditioners or split air conditioners coming in cool-only versions or reversible heat pump configurations, are available.
Other heating and air conditioning sistems can be arranged to meet specific requirements expressed by the Customer.
Top